Transmit Optical Output; Normal Laser Operation; Figure 4 Laser Warning Labels - Nokia 7368 ISAM ONT G-240W-C Product Manual

ETSI ONT safety guidelines
Figure 4
2.5.2
The maximum transmit optical output of an ONT is +5 dBm.
2.5.3
In normal operation, fiber cable laser radiation is always off until it receives signal
from the line terminal card.
Eyes can be damaged when they exposed to a laser beam. Operating personnel
must observe the instructions on the laser explanatory label before plugging in the
optical module.
24
R05.05.01 | December 2016 | 3FE 46690 AAAA TCZZA | Edition 01
Laser warning labels
Laser Warning Label
NE PAS DEMONTER. FAIRE APPEL A UN PERSONNELL QUALIFIE
RADIACION DE LASER INVISIBLE. EVITAR CUALOUIER EXPOSICION AL
RAYO LASER. NO DESMONTAR. LLAMAR A PERSONAL AUTORIZADO
INVISIBLE LASER RADIATION PRESENT AT FIBER OPTIC CABLE
WHEN NOT CONNECTED. AVOID DIRECT EXPOSURE TO BEAM.

Transmit optical output

Normal laser operation

Risk of eye damage by laser radiation.
Danger —
7368 ISAM ONT G-240W-C Product Guide
INVISIBLE LASER RADIATION
DO NOT STARE INTO BEAM
OR VIEW DIRECTLY WITH
OPTICAL INSTRUMENTS
Wavelength(s): xxxx nm
Normal output power: xx m W
Max output power: yyy m W
CLASS 1 LASER PRODUCT
RAYONNEMENT LASER CLASSE 1
RAYONNEMENT LASER INVISIBLE
EVITER TOUTE EXPOSITION AU FAISCEAU
CLASE 1 DEL LASER
Laser Warning Label
Edition 01
Laser Warning Label
18993
Issue: 01