10.5.3
Safety and protection
120 (128)
Data Network Terminal Single-port and Multiport Operating Instructions
Table 23.
EMC requirements
EN 55022 class B (1994)
EN 55024 (1998)
EN 300386-2 (1998)
Note
The conditions listed in Section 5.1 must be fulfilled.
Concerning protection and safety, DNT2Mi follows the requirements and
specifications listed below:
Table 24.
DNT2Mi safety and protection
AC power
Electrical safety
supply
Surge protection
DC power
Dielectric strength
supply
Surge protection
Line interface
Safety
Surge protection
50 Hz common mode
test
© Nokia Corporation
Nokia Proprietary and Confidential
EN 60950
4 kV common mode, 2 kV differential
mode according to EN 61000-4-5
500 V
RMS
1 kV according to EN 61000-4-5
EN 60950
1.5 kV according to ITU-T Rec. K.21
600 V
common mode according to
RMS
ITU-T Rec. K.21
DN01145897
Issue 2-0 en