Figure 17 G-240W-C Indoor Ont With Wall Mounting Bracket Attached - Nokia 7368 ISAM ONT G-240W-C Product Manual

Hide thumbs Also See for 7368 ISAM ONT G-240W-C:
Table of Contents

Advertisement

7368 ISAM ONT G-240W-C Product Guide
Figure 17
3
4
5
6
Issue: 01
R05.05.01 | December 2016 | 3FE 46690 AAAA TCZZA | Edition 01
G-240W-C indoor ONT with wall mounting bracket attached
1
T E L
ii
Attach the ONT to the wall.
Review the connection locations as shown in Figure 15.
Connect the Ethernet cables to the RJ-45 ports; see Figure
ports.
Route the POTS cables directly to the RJ-11 ports as per local practices.
The POTS port to the left is labeled 1 for Line 1 while the port on the right is labeled 2 for Line
2, as shown in Figure 15.
Connect the fiber optic cable with SC/APC adapter into the SC/APC connector; see Figure
for the location of the SC/APC connector.
Danger — Fiber cables transmit invisible laser light. To avoid eye
damage or blindness, never look directly into fibers, connectors, or
adapters.
Warning — Be careful to maintain a bend radius of no less than 1.5 in.
(3.8 cm) when connecting the fiber optic cable. Too small of a bend radius
in the cable can result in damage to the optic fiber.
F
/O F
O N
R
W E
P O
B 2 .0
U S
A N
W L
B 3 .0
G
S 2 .4
U S
W P
4
L A N
E T
R E S
S 5 G
3
L A N
W P
2
L A N
1
L A N
2
T E L
Edition 01
Install a G-240W-C indoor ONT
Wall mounting
bracket
15
for the location of the RJ-45
25276
15
59

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents