Table of Contents
Advertisement
Î Select "Apply" in the menu (
save changes.
5.3.5
Assigning modules
Î Go to the main menu (
Î Select "Module assignment" in "Set-
tings".
The logical modules are listed.
Î Select one physical module for each logi-
cal module one after the other.
Î The LEDs of a physical module blink after
it has been selected. Confirm selection by
checking the box (top right) or repeat se-
lection procedure until the correct physi-
cal module has been selected.
Î Select "Apply" in the menu (
save changes.
Note
We recommend performing the restore
function ("Restoring the system" in "Settings")
after assigning the module. This ensures that
the settings remain saved even after a power
failure.
5.3.6
Calibrating the touch
screen
Î Go to the main menu (
Î Select "Touch screen calibration" in "Set-
tings". Select "Start touch screen calibra-
tion".
Î Tap the crosshair with a pointed item
each time it appears on the screen.
EB 6611-2 EN
5.4 Quick check
button) to
"I/O test" allows the unit's ability to function
to be checked. It allows you to check all the
connected modules and the physical inputs
and outputs.
button).
Î After changing to the main menu (
Î Manually switch the outputs one after the
button) to
button).
Mounting and start-up
ton), select "I/O test".
other to check that they function.
but-
19
Advertisement
Table of Contents
