Table of Contents
Advertisement
Mounting and start-up
5.3.3
Setting the system time
Î Go to the main menu (
Î Select "Date and time" in "Settings".
Î Change the time and date.
Î Select "Apply" in the menu (
save changes.
5.3.4
Network settings
The unit has an integrated web server
(TROVIS MOBILE), which can be simply ac-
cessed over the network and browser
through the IP address. It must have the same
address as the end device (smartphone,
notebook, tablet computer, computer, etc.)
and an active HTTPS.
TROVIS MOBILE is designed for modern web
browsers, e.g. Mozilla Firefox in version
V.45 and higher. Access to the Internet re-
quires port forwarding using a router (e.g.
VPN) to be set up on site.
Note
The LAN setting is set to DHCP in the default
setting. In this setting, it is assumed that the
TROVIS 6611-2 Control and Automation
Unit is assigned to an IP address, e.g.
belonging to a router. However, the IP
address is not assigned, for example, when
the TROVIS 6611-2 unit is directly connected
to a laptop using a network cable. In this
case, DHCP must be deactivated to allow the
preset static IP address to be used. The
currently used and active IP address can be
found in [Main menu > Device information >
Network: eth0]. This information is available
regardless of the user role.
18
Î Go to the main menu (
Î Select "Network settings" in "Settings".
button).
Î Set the "LAN port" to ON.
Î Select "Back one level" in the menu (
button) to
Î Set all other parameters in "LAN set-
Î If necessary, select "Services" in "Net-
Impaired device function and loss of war-
ranty through the improper use of the "root"
user role.
− Only activate SSH for troubleshooting and
− Do not leave the SSH constantly activated.
− Assign a "root" password to protect its ac-
button) to exit the level.
tings":
− DHCP: ON (= default)
− IP address: 172.30.66.11 (= default)
− Subnet mask: 255.255.0.0 (= default)
− Host name: TROVIS-6111-2-xxx (xxx
= device-specific MAC address)
− DNS server
− NTP server
work":
− Activate FTPS for use with graphical
project management (default = OFF)
− Activate HTTPS for the use of the inte-
grated TROVIS-MOBILE web server
(default = OFF)
− SSH for console access using the
"root" user role
NOTICE
!
administration activities performed by
trained personnel.
cess.
button).
EB 6611-2 EN
Advertisement
Table of Contents
