Samson TROVIS 6600 Mounting And Operating Instructions page 6

Safety instructions and measures
Qualifications of operating personnel
− The unit must be mounted, started up, serviced and repaired by fully trained and quali-
fied personnel only; the accepted industry codes and practices are to be observed.
− The projects must be configured and set by trained and experienced personnel only.
According to these mounting and operating instructions, trained personnel refers to individu-
als who are able to judge the work they are assigned to and recognize possible hazards due
to their specialized training, their knowledge and experience as well as their knowledge of
the applicable standards.
Personal protective equipment
No personal protective equipment is required.
Revisions and other modifications
Revisions, conversions or other modifications to the product are not authorized by SAMSON.
They are performed at the user's own risk and may lead to safety hazards, for example. Fur-
thermore, the product may no longer meet the requirements for its intended use.
Safety features
The operation of the unit is password-protected to protect it from unauthorized access. A user
role with individual privileges and password is assigned to each user.
Warning against residual hazards
The control and automation unit has direct influence on controlled plant components (e.g.
control valves and pumps) over the I/O modules. To avoid personal injury or property dam-
age, plant operators and operating personnel must prevent hazards that could be caused in
the plant components by the process medium, the operating pressure, the signal pressure or
by moving parts by taking appropriate precautions. They must observe all hazard state-
ments, warning and caution notes in the referenced documents.
Responsibilities of the operator
The operator is responsible for proper operation and compliance with the safety regulations.
Operators are obliged to provide these mounting and operating instructions to the operating
personnel and to instruct them in proper operation. Furthermore, the operator must ensure
that operating personnel or third persons are not exposed to any danger.
6 EB 6611-2 EN