Binding Settings - TP-Link TL-MR6400 User Manual

There are two submenus under the IP &MAC Binding menu:
Click any of them, and you will be able to scan or configure the corresponding function. The
detailed explanations for each submenu are provided below.

4.15.1 Binding Settings

This page displays the
MAC Address - The MAC address of the controlled computer in the LAN.

IP Address - The assigned IP address of the controlled computer in the LAN.

Bind - Check this option to enable ARP binding for a specific device.

Modify - To modify or delete an existing entry.

When you want to add or modify an IP & MAC Binding entry, you can click
and then you will go to the next page. This page is used for adding or modifying an IP & MAC
Binding entry.
To add IP & MAC Binding entries, follow the steps below.
1. Click Add New....
2. Enter the MAC Address and IP Address.
3. Select the Bind checkbox.
4. Click Save.
Binding Settings table, you can operate it in accord with your desire.
Binding Settings
-67-
TL-MR6400 User Guide
and ARP List.
Add New or Modify,