TP-Link TL-MR6400 User Manual page 67

For example: If you desire to allow the host with MAC address 00-11-22-33-44-AA to access
www.tp-link.com only from 18:00 to 20:00 on Saturday and Sunday, and forbid other hosts in
the LAN to access the internet, you should follow the settings below:
1. Click the submenu
Enable Internet Access Control and choose "Allow the packets specified by any enabled
access control policy to pass through the router", then click Save.
2. We recommend that you click
3. Click the submenu
entry with the Host Description is Host_1 and MAC Address is 00-11-22-33-44-AA, then
click Save.
4. Click the submenu
new entry with the Target Description is Target_1 and Domain Name is www.tp-link.com,
then click Save.
5. Click the submenu
Add a new entry with the Schedule Description is Schedule_1, Day is Sat and Sun, Start
Time is 1800 and Stop Time is 2000, then click Save.
6. Click the submenu
rule as follows:
In Rule Name
1)
example Rule_1.
In Host field, select Host_1.
2)
In Target field, select Target_1.
3)
In Schedule field, select Schedule_1.
4)
In Status field, select Enable.
5)
Click Save to complete the settings.
6)
Then you will go back to the Access Control Rule Management page and see the following list.
Rule of Access Control
Setup Wizard
Host of Access Control
Target of Access Control
Schedule of Access Control
Rule of Access Control
field, create a name for the rule. Note that this name should be unique, for
in the left to return to the Rule List page. Select
to finish all the following settings.
in the left to enter the Host List page. Add a new
in the left to enter the Target List page. Add a
in the left to enter the Schedule List page.
in the left, Click Add New...
-59-
TL-MR6400 User Guide
button to add a new