Ip&Mac Binding; Binding Settings - TP-Link TL-WR841N User Manual

Chapter 4
¾ To add a Bandwidth control rule:
1. Click
2. Enter the information as the figure shown below.
3. Click Save.
4. 13. IP&MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind
a network device's IP address to its MAC address. This will prevent ARP spoofing and
other ARP attacks by denying network access to a device with a matching IP address in
the ARP list, but with an unrecognized MAC address.

4. 13. 1. Binding Settings

1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to
3. Select
4. Click Save.
¾ To add IP & MAC Binding entries:
1. Click
2. Select the
Downloaded from ManualsNet.com
Add New.
IP & MAC Binding > Binding
Enable for ARP Binding.
Add New.
Bind checkbox.
search engine
Settings.
Configure
53