Factory Defaults; Backup & Restore - TP-Link TL-MR6400 User Manual


Note:
The firmware version must correspond to the hardware. The upgrade process takes a few moments
and this device restarts automatically when the upgrade is complete. It is important to keep power
applied during the entire process. Loss of power during the upgrade could damage this device.

5.18.5 Factory Defaults

Go to System Tools
→
factory defaults on the following screen.
Click Restore to reset all configuration settings to their default values.
The default User

The default Password: admin

The default IP

The default Subnet


Note:
All changed settings will be lost when defaults are restored.
5.18.6 Backup & Restore
Go to System Tools
→
as a backup file and restore the configuration via a backup file.
Click Backup to save all configuration settings to your local computer as a file.

To restore this device's configuration, follow these instructions:

Click Choose File
3)
Click Restore
4)
input or selected in the blank.

Note:
Factory Defaults, and you can restore the configurations of the router to
Name: admin
Address: 192.168.1.1
Mask: 255.255.255.0
Backup & Restore, you can save the current configuration of the router
to find the configuration file which you want to restore.
to update the configuration with the file whose path is the one you have
-115-
TL-MR6400 User Guide