System Routing Table; Ip & Mac Binding - TP-Link TL-MR6400 User Manual

Gateway - This is the IP Address of the gateway device that allows for contact between

the router and the network or host.
3. Select Enabled or
4. Click Save to make the entry effective.
Click Delete to delete the entry.
Click Enable All to enable all the entries.
Click Disable All to disable all the entries.
Click Delete All to delete all the entries.
Click Previous to view the information in the previous screen, click
in the next screen.

4.14.2 System Routing Table

Go to Advanced Routing
in the next screen. System routing table views all of the valid route entries in use.
Destination Network

which the static route is assigned.
Subnet Mask - The

portion, and which portion is the host portion.
Gateway - This is the IP address of the gateway device that allows for contact between the

router and the network or host.
Interface - This interface tells you whether the Destination IP Address is on the LAN &

WLAN (internal wired and wireless networks), the WAN (internet).
4.15 IP & MAC Binding
Disabled for this entry on the
System Routing
→
- The Destination Network
Subnet Mask determines which portion of an IP address is the network
Status pull-down list.
Next
Table, you can configure the system routing table
is the address of the network or host to
-66-
TL-MR6400 User Guide
to view the information