TP-Link TL-MR6400 User Manual page 42

Wireless Password

the length should be between 8 and 64 characters; for ASCII, the length should be
between 8 and 63 characters.
Group Key Update Period

should be 30 or above. Enter 0 to disable the update.
Click Save to make the settings effective.
WPA /WPA2 - Enterprise

Version - you can choose the version of the WPA security on the pull-down list. The

default setting is Automatic, which can select
(WPA version 2) automatically based on the wireless station's capability and request.
Encryption - You can select either Automatic, or


Note:
If you check the
find a notice in red as shown below
Radius Server IP

Radius Port - Enter the port that radius service used.

Radius Password

Group Key Update Period

should be 30 or above. Enter 0 to disable the update.
WEP - It is based on the IEEE 802.11 standard. If you select this check box, you will find a

notice in red as show below.
- You can enter ASCII or Hexadecimal characters. For Hexadecimal,
- Specify the group key update interval in seconds. The value
- It's based on Radius Server.
WPA/WPA2 - Enterprise
.
- Enter the IP address of the Radius Server.
- Enter the password for the Radius Server.
- Specify the group key update interval in seconds. The value
WPA (Wi-Fi Protected Access) or
TKIP or AES.
radio button and choose TKIP encryption, you will
-34-
TL-MR6400 User Guide
WPA2