TP-Link TL-MR6400 User Manual page 25

Wireless Radio

Wireless Network Name

SSID (Service Set Identification) must be assigned to all wireless devices in your
network. Considering your wireless network security, the default SSID is set to be
TP-Link_XXXX (XXXX indicates the last unique four numbers of each router's MAC
address). This value is case-sensitive. For example, TEST is NOT the same as test.
Disable Security

disabled, the wireless stations will be able to connect the router without encryption. It
is recommended strongly that you choose one of following options to enable security.
WPA-PSK/WPA2-PSK

passphrase.
Wireless Password

For ASCII, the key can be made up of any numbers 0 to 9 and any letters A to Z,
the length should be between 8 and 63 characters.
For Hexadecimal, the key can be made up of any numbers 0 to 9 and letters A to F,
the length should be between 8 and 64 characters.
Please also note the key is case sensitive, this means that upper and lower case
keys will affect the outcome. It would also be a good idea to write down the key
and all related wireless security settings.
No Change - If you chose this option, wireless security configuration will not change.

These settings are only for basic wireless parameters. For advanced settings, please refer
to 4.7 Wirelss.
11. Click Finish to complete the
- Enable or disable the wireless function.
- Enter a string of up to 32 characters. The same name of
- The wireless security function can be enabled or disabled. If
– Select WPA-PSK/WPA2-PSK based on pre-shared
- You can enter
Quick Setup.
ASCII or Hexadecimal
-17-
TL-MR6400 User Guide
characters.