Table of Contents
Advertisement
Chapter 4
•
Description
- This is the information about the rules such as address range.
•
Egress Bandwidth
- This field displays the max and min upload bandwidth through the
WAN port. The default is 0.
•
Ingress Bandwidth
the WAN port. The default is 0.
•
Status
- This field displays the status of the rule.
•
Modify
- Click
Modify/Delete
¾ To add a Bandwidth control rule:
1. Click
Add
New.
2. Enter the information as the figure shown below.
3. Click Save.
4. 13. IP&MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind
a network device's IP address to its MAC address. This will prevent ARP spoofing and
other ARP attacks by denying network access to a device with a matching IP address in
the ARP list, but with an unrecognized MAC address.
4. 13. 1. Binding Settings
1. Visit http://tplinkwifi.net, and log in with the default username and password: admin.
2. Go to
IP & MAC Binding
3. Select
Enable
for ARP Binding.
- This field displays the max and min download bandwidth through
to edit/delete the rule.
>
Binding
Settings.
Configure the Router in Standard Wireless Router
55
Advertisement
Table of Contents
