Diagnostic - TP-Link TL-MR6400 User Manual

3. Click the Get GMT
internet.
To set up daylight saving:
1. Check the box to enable Daylight Saving.
2. Select the start time from the drop-down lists in the
3. Select the end time from the drop-down lists in the
4. Click Save to make the settings effective.

Note:
1)
This setting will be used for some time-based functions such as firewall. You must specify your
time zone once you log in to the router successfully, otherwise, these functions will not take
effect.
2)
The time will be lost if the router is turned off.
3)
The router will automatically obtain GMT from the internet if it is configured accordingly.
4)
In daylight saving configuration, start time shall be earlier than end time.

4.17.3 Diagnostic

Go to System Tools
connectivity of your network in the following screen.
Diagnostic Tool -

button to get system time from internet if you have connected to the
→ Diagnostic, you can transact Ping or Traceroute function to check
Check the radio button to select one diagnostic tool.
Start field.
End field.
-74-
TL-MR6400 User Guide