Network; Wan - TP-Link TL-MR6400 User Manual

5.5 Network

There are four submenus under the Network menu: WAN,
any of them, and you will be able to configure the corresponding function.
5.5.1

WAN

Go to Network → WAN, and you can configure the IP parameters of the WAN on the screen
below.
1. If your ISP provides the DHCP service, please choose
automatically get IP parameters from your ISP. You can see the page as follows:
This page displays the WAN IP parameters assigned dynamically by your ISP, including IP
address, Subnet Mask, Default Gateway, etc. Click
from your ISP. Click Release to release the IP parameters.
MAC Clone,
Dynamic IP
Renew to renew the IP parameters
-83-
TL-MR6400 User Guide
LAN and VLAN. Click
type, and the router will