Backup & Restore; Reboot - TP-Link TL-MR6400 User Manual


Note:
All changed settings will be lost when defaults are restored.
4.17.6 Backup & Restore
Go to System Tools
→
as a backup file and restore the configuration via a backup file.
Click Backup to save all configuration settings to your local computer as a file.

To restore this device's configuration, follow these instructions:

Click Choose File
1)
Click Restore
2)
input or selected in the blank.

Note:
The current configuration will be covered with the uploading configuration file. Wrong process will lead
this device unmanaged. The restoring process lasts for 20 seconds and this device will restart
automatically then. Keep the power of this device on during the process, in case of any damage.

4.17.7 Reboot

Go to System Tools → Reboot, you can click
Some settings of the router will take effect only after rebooting, which include
Change the LAN IP Address (system will reboot automatically).

 Change the DHCP Settings.
 Change the Web Management Port.
Upgrade the firmware of this device (system will reboot automatically).

 Restore this device's settings to the factory defaults (system will reboot automatically).
Update the configuration with the file (system will reboot automatically).

Backup & Restore, you can save the current configuration of the router
to find the configuration file which you want to restore.
to update the configuration with the file whose path is the one you have
Reboot to reboot the router.
-77-
TL-MR6400 User Guide