TP-Link TL-MR6400 User Manual page 44

Description - A simple description of the wireless station.

To Add a Wireless MAC Address filtering entry, click
MAC Address Filtering entry
To add a MAC Address Filtering entry, follow these instructions:
1. Enter the appropriate MAC Address into the
Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example:
00-0A-EB-00-07-8A.
2. Enter a simple description of the wireless station in the
Wireless station A.
3. Status - Select Enabled
4. Click Save.
To modify an existing entry:
1. Click the Modify in the entry you want to modify.
2. Modify the information.
3. Click Save.
Click Delete in the entry you want to delete to delete an existing entry.
Click Enable All to make all entries enabled.
Click Disable All to make all entries disabled.
Click Delete All to delete all entries.
Click Next to go to the next page.
Click Previous to return to the previous page.
For example: If you desire that the wireless station A with MAC address 00-0A-EB-00-07-8A
and the wireless station B with MAC address 00-0A-EB-00-23-11 are able to access the router,
but all the other wireless stations cannot access the router, you can configure the
MAC Address Filtering
page will appear:
or Disabled for this entry on the
list by following these steps:
Add New.... The
MAC Address field. The format of the MAC
Description
Status drop-down list.
-36-
TL-MR6400 User Guide
Add or Modify Wireless
field. For example:
Wireless