Introduction; Intended Use Of The Zortrax Printers - zortrax M200 Plus User Manual

Introduction

Read this User Guide carefully and thoroughly before operating Zortrax products for the first
time. The User Guide includes basic information about the 3D printer, safety and protection
guidelines as well as advice on preparing the machine for the first printing and basic main-
tenance work. Ignorance and non-compliance with these instructions may result in property
damage, injuries, device failures or lower quality of 3D prints. It is also necessary to ensure
that every 3D printer user knows, fully understands and follows the instructions provided in
this User Guide.
The Manufacturer makes every effort to ensure that Zortrax products are safe in transporta-
tion, installation, usage, storage and disposal.
However, due to the lack of direct and ad hoc control as well as other conditions influencing
the device and those that are beyond the Manufacturer' s knowledge, the Manufacturer is not
responsible for damages, injuries, failures and costs resulting from improper transportation,
installation, usage, storage and disposal.
Furthermore, the users should take into consideration the risk of possible damages of the
device resulting from defects in material and workmanship.

Intended Use of the Zortrax Printers

Zortrax 3D printers work in the Layer Plastic Deposition (LPD) technology, in which a previously
melted material is deposited on a surface layer after layer in order to form a pre-designed
shape. The extruder is equipped with three heating points, which allows the melted material to
exit the nozzle and be deposited onto the heated platform without causing blockages. Zortrax
3D printers, together with Z-SUITE and dedicated materials, make it possible to achieve high
quality prints, however, the users are responsible for qualifying and determining the intended
use of 3D printed models. The Manufacturer takes no responsibility for any use of the printed
objects, especially when those objects constitute a part of safety equipment or strictly regula-
ted medical, military or space science equipment.
Due to the size and specificity, Zortrax devices are not intended for use by children under the
age of 14 and by people with reduced manual, motor and psychomotor skills. The Manufactu-
rer recommends providing assistance and guidance to people with disabilities and older adults
who wish to operate Zortrax printers.
©2018, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following
document are registered trademarks of Zortrax and are subject to legal protection.
3