Introduction; Intended Use Of The Zortrax Inventure - zortrax Inventure User Manual

Introduction

Read this User Guide carefully and thoroughly before operating Zortrax products for the first
time. The User Guide includes basic information about the 3D printer, safety and protection
guidelines as well as advice on preparing the machine for the first printing and basic main-
tenance work. Ignorance and non-compliance with these instructions may result in property
damage, injuries, device failures or lower quality of 3D prints. It is also necessary to ensure
that every 3D printer user knows, fully understands and follows the instructions provided in
this User Guide.
The Manufacturer makes every effort to ensure that Zortrax products are safe in transporta-
tion, installation, usage, storage and disposal.
However, due to the lack of direct and ad hoc control as well as other conditions influencing
the device and those that are beyond the Manufacturer' s knowledge, the Manufacturer is not
responsible for damages, injuries, failures and costs resulting from improper transportation,
installation, usage, storage and disposal.
Furthermore, the users should take into consideration the risk of possible faults of the device
resulting from material and production defects.

Intended Use of the Zortrax Inventure

The Zortrax Inventure 3D prints in the Layer Plastic Deposition Plus (LPD Plus) technology
which is an innovative and easy to use technology that introduces an entirely new 3D prin-
ting quality with a soluble support material. Thanks to this solution, it is possible to achieve
more precise and intricate shapes without the risk of damaging details during the removal of
support structures. The Zortrax Inventure, that uses this technology, is equipped with two ho-
tends that print with support and model material interchangeably. Once the printing process
is finished, it is necessary to insert a model into a special Zortrax DSS station in order to obtain
a smooth model' s surface that is free of any material residue. Zortrax 3D printers together
with the Z-SUITE and dedicated materials guarantee achieving high quality prints. However,
the users are responsible for qualifying and determining the intended use of the 3D printed
models. The Manufacturer takes no responsibility for any use of the printed objects, especially
when these objects constitute a part of safety equipment or strictly regulated medical, military
or space science equipment.
©2017, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following
document are registered trademarks of Zortrax and are subject to legal protection.
1