Introduction; Intended Use Of Zortrax Printers - zortrax M300 Dual User Manual

Introduction

Read this User Guide carefully and thoroughly before operating Zortrax products for the
first time. The User Guide contains basic information about the 3D printer, safety and
protection guidelines as well as advice on preparing the machine for the first printing and
basic maintenance work. Ignorance and non-compliance with these instructions may result
in property damage, injuries, device failures, or lower quality of 3D prints. It is also necessary
to ensure that every 3D printer user knows, fully understands, and follows the instructions
provided in this User Guide.
The Manufacturer makes every effort to ensure that Zortrax products are safe in transportation,
installation, usage, storage, and disposal. However, the Manufacturer is not responsible for
damage, injuries, failures, and costs resulting from improper transportation, installation,
usage, storage, and disposal given the lack of direct and indirect control over the device, and a
number of other factors influencing the device and those which are beyond the Manufacturer' s
knowledge.
Furthermore, the users should take into consideration the risk of possible damage of the
device which may result from defects in material and workmanship.

Intended Use of Zortrax Printers

The Zortrax M300 Dual works in the Layer Plastic Deposition Plus (LPD Plus) technology, in
which previously melted materials are deposited on a surface layer after layer in order to
form a predesigned shape. The extruder is equipped with several heating points which allow
the melted materials to exit the nozzles and be deposited onto the heated platform without
causing blockages.
The users are responsible for qualifying and determining the intended use of 3D printed
models. The Manufacturer takes no responsibility for any use of the printed objects, especially
when those objects constitute a part of safety equipment or strictly regulated medical, military,
or space science equipment.
Due to the size and specificity of Zortrax devices, the equipment is not intended for use by
children under the age of 14 and people with reduced manual, motor and psychomotor skills.
The Manufacturer recommends providing assistance and guidance to people with disabilities
and older adults who wish to operate the printers.
©2019, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following
3
document are registered trademarks of Zortrax and are subject to legal protection.