Save The Measured Value; Browse And Print Data; Setup; Setup Menu - sauter FC 10 Instruction Manual

Preset: In this mode, you can set the tolerance upper limit and lower limit of meas-
ured force value to do a GO/NG measurement. See chapter 3.2.
④ Before measurement, you should zero the tare by pressing
⑤ The force gauge often is used hand-held. But mounting it on a test stand for use
may be more accurate and easier or safer. We just recommend this way of use.

2.3 Save the measured value

Measured results can be stored in the force gauge; you can review or print them
later.
During the measurement, press the key
will be displayed.
The data stored is the one displayed currently. So, in Track and Preset mode it is the
current force value measured, in Peak mode it is the peak value.

2.4 Browse and print data

All data stored in the memory can be browsed or printed by the mini-printer.
See chapter 3.3.1 and 3.3.2 for details.

3 Setup

3.1 Setup menu

This series force gauge has multi-level menu interface. Show as Table 3-1.
Table3-1
Measurement
Memory
Menu
System
Language
Info
Under menu interface: Press
Press will confirm a setup and return.
Press can cancel some setting and return or just for return.
FC-BA-e-1410
Unit
Test Mode
Browse
Print
Delete All
Display
Auto Po-
wer
Backlight
Key
Sound
Date/Time
Calibration
Default
or can select the item of menu.
to store a value, and the storage Icon
The setting will be very simple:
Under measure interface: Press Menu
key can enter Menu setup.
.
7