Set Limit Value; Setting The Resolution - sauter TO-EE Instruction Manual

5.8 Set limit value

Test results outside limits are displayed in red to alert the user. To change the limit
setting, press the F1 / F2 key to move the highlighted cursor. Press the arrow keys to
increase / decrease the values.
Press the key or the F3 key to confirm the setting. Press the key to cancel the
change and exit the mode.
5.9 Set resolution
The resolution of the display of the measuring instrument can be set within a range of
0.1 mm or 0.01 mm.
When the resolution is set to 0.01 mm, the surface of the test piece should be smooth
to obtain accurate test results. When measuring rough surfaces or coarse-grained
materials, it is recommended to use the low resolution.
20 TO-BA-e-2020