Checking Operation - Omron E5CC Communications Manual

6 Programless Communications
6-4-5

Checking Operation

The SP and RUN/STOP status of the E5@C Controllers will be changed to check operation. Make sure
that this will not create any problems in the controlled system.
 Checking E5CC Monitor Values
(1) The PLC operating mode must be changed to PROGRAM mode to enable changing
values in PLC memory.
Perform step 1 in Communications Settings for the Serial Communications Option Board in
6-4-3 PLC Setup to move to PROGRAM mode.
(2) Double-click Memory. The PLC Memory Window will be displayed.
(3) We will monitor memory in the PLC Memory Window.
Double-click D to select the DM Area in the left pane and then select Online
from the menu bar. The Monitor Memory Areas Dialog Box will be displayed. Click the
Monitor Button.
6 - 28 E5@C Digital Temperature Controllers Communications Manual (H175)
−
Monitor