Omron E5CC Communications Manual page 76

3 Communications Data for CompoWay/F
Variable
Address
type
C3 (83) 00CA
C3 (83) 00CB
C3 (83) 00CC
C3 (83) 00CD
*1 Selection is possible only with the E5CC-U, E5DC, and E5GC and only when there is a control output that
is a linear current output.
(The E5CC-U must be manufactured in May 2014 or later (version 2.2 or higher) and the E5DC must be
manufactured in July 2014 or later (version 2.2 or higher).)
*2 You can use this parameter only with the E5EC-PR@-8@@ or E5AC-PR@-8@@. (The Digital Controller
must be manufactured in August 2014 or later (version 2.2 or higher).)
3 - 22
Parameter name
Simple Transfer
H'FFFFF831 to H'0000270F (−1999 to 9999)
Output 1 Upper
*1
Limit
Simple Transfer
H'FFFFF831 to H'0000270F (−1999 to 9999)
Output 1 Lower
*1
Limit
FB Moving Average H'00000000 (0): OFF
H'00000001 (1): 2 times
*2
Count
H'00000002 (2): 4 times
H'00000003 (3): 8 times
H'00000004 (4): 16 times
H'00000005 (5): 32 times
Valve Opening H'00000000 (0): Measured opening
H'00000001 (1): Estimated opening
*2
Monitor Selection
Setting (monitor) value
E5@C Digital Temperature Controllers Communications Manual (H175)
Level
Initial setting
Advanced
function setting
Initial setting