Epson EU-T432 Technical Manual page 79

Confidential
Main Assembly C
Reassembly
Part name
step
7 R.E. (2)
8
Rev. A
<Check>
Hook the longer edge of the spring, lever into the groove on the lever,
platen.
Make sure not to deform the spring, lever.
groove
× 1
Install the lever, platen to the shaft, frame platen, and secure it with an
R.E..
lever, platen
R.E. (2)
<Check>
Make sure that the shaft, lock lever is placed properly into the specified
position on the lever, platen.
Remove the longer edge of the spring, lever, and hook it on the shaft,
lock lever.
EU-T432 Technical Manual
Assembly procedure
lever, platen
shaft, lock lever
shaft, lock lever
longer edge of the spring, lever
Assembly and Disassembly 6-19
longer edge
shaft, lock lever
shaft, frame platen