Main Assembly B: Cut Sheet Presenter Module - Epson EU-T432 Technical Manual

Confidential

Main Assembly B: Cut sheet presenter module

Reassembly
Part name
step
2 Cut sheet presenter
module
Shaft, presenter fulcrum × 2
3
Spring, presenter
C.B.S-tite (3 × × × × 12)
4
★
5 Wire band SKB-85
★
6 Wire band SKB-85
shaft, presenter
fulcrum
spring, presenter
C.B.S-tite (3 × 12)
6-52 Assembly and Disassembly
Lubricate the shaft, presenter fulcrums on the both sides of the fixing
plate, printer assembly with G-36.
Align the U notches on the cut sheet presenter module with the shaft,
× 1
presenters and attach the module to the fixing plate, printer assembly.
Attach the spring, presenters to the shaft, presenter fulcrums on the both
× 2 side; then secure them with C.B.S-tite (3 × × × × 12) screws.
× 2
Hook the spring, presenters to the hooks on the both side of the cut sheet
presenter frame.
< Check >
Tightening torque: 735 to 931 mN•m {7.5 to 9.5 kg•cm}
×1
Fasten the lead wires of the lead wire, presenter to the fixing plate, printer
assembly with a wire band.
< Check >
Fasten the lead wires with the cut sheet presenter module open.
×1
Fasten the lead wires of the lead wire, presenter on the U notch of the cut
sheet presenter module.
cut sheet presenter module
lead wire, presenter
U notch
hook for the spring,
presenter
Assembly procedure
shaft, presenter
fixing plate, printer
assembly
lead wire, presenter
wire band
Rev. A