Table of Contents
Advertisement
Confidential
Pre-assembly E
Reassembly
Part name
step
3
Emergency cutter, full, B
C.B.(M2 × × × × 2.5)
4
Plate, A/C assembly
6-12 Assembly and Disassembly
Install the emergency cutter, full, B to the cutter cover sub-unit with
× 2
screws.
C.B.(M2 × 2.5)
<Check>
Tightening torque: 98 to 147 mN•m {1.0 to 1.5 kg•cm}
Make sure that the dowels on the cutter cover sub-unit is fitted in the holes
on the emergency cutter, full, B.
Peel the backing off of a couple-face tape.
Hook the bent part of the plate, A/C to the edge of the cover, cutter.
Align parts A and B with the holes on the plate, A/C as shown below, and
stick the plate to the cutter cover sub-unit.
plate, A/C
A
Assembly procedure
emergency cutter, full, B
cutter cover sub unit
B
mounting
position
Rev. A
Hide quick links:
Advertisement
Table of Contents
