Epson EU-T432 Technical Manual page 96

Confidential
Reassembly
Part name
step
9 Roll paper holder R
assembly (for a 6 inch
paper roll diameter)
or
Roll paper holder R
assembly, B (for a 8 inch
paper roll diameter)
Spring, roll paper holder × 2
10 Roll paper holder R
assembly
assembly, B)
C.B (M3 × × × × 8)
★
spring, roll paper holder
C.B (M3 × 8)
(mounting position for
8 inch type）
6-36 Assembly and Disassembly
Attach the spring, roll paper holder to the roll paper holder R assembly (or
roll paper holder R assembly, B).
× 1
× 1
Align two dowels A on the roll paper holder, R assembly with the square
holes A from the inside of the frame, roll paper holder; then secure the
(Roll paper holder R
× 1
assembly with C. B (M3 x 8) screws from the outside. (The dowels and
× 2
square holes B for the roll paper holder R assembly, B)
< Check >
Tightening torque: 539 to 637 mN•m {5.5 to 6.5 kg•cm}
roll paper holder, R
assembly (for 6 inch type)
square holes A
C.B (M3 × 8)
(mounting position for
6 inch type）
Assembly procedure
spring, roll paper holder
dowel s A
dowels B
square holes B
roll paper holder, R
assembly, B (for 8 inch type
frame, roll paper
holder
Rev. A