Table of Contents
Advertisement
Confidential
Reassembly
Part name
step
10
PO detector assembly
C.P (2 × × × × 6)
★
11
Lead wire, presenter
Wire band SKB-85
★
connector for the lead wire,
presenter
(Lead wires for
the lead wire,
presenter
square
hole
PO detector
6-48 Assembly and Disassembly
× 1
Secure the PO detector to the presenter frame, right assembly with a C.P
× 1
(2 × × × × 6) screw from inside.
< Check >
Tightening torque: 196 to 294 mN•m {2.0 to 3.0 kg•cm}
C.P (2 × 6)
PO detector
× 1
Connect the lead wire, presenter to the connector on the circuit board
× 6
assembly and take out the lead wires through the square hole on the
presenter frame, right; then fasten the lead wires to the frame with a wire
band. (wire band:
Connect the PO detector to the connector on the circuit board
assembly, and fasten the lead wires for the lead wire, presenter with wire
bands at two places. (wire bands:
Connect the paper detector, assembly 1, the paper detector assembly
and the motor presenter to the connectors on the circuit board
assembly.
Fasten lead wires with wire bands. (wire bands:
< Check >
Paper detector, assembly 1: Connect to the blue connector.
connector for the presenter motor
(Lead wires for: presenter motor,
PO detector, and paper
(Lead wires for
detector assembly/assembly 1)
PO detector)
Assembly procedure
)
connector for the PO detector
connector for the
paper detector,
hook
assembly 1
)
and
)
connector for the
paper detector,
assembly
(Lead wires for presenter
motor and paper detector
assembly/ assembly 1)
Rev. A
Hide quick links:
Advertisement
Table of Contents
