Dnd Synchronization For Server-Side Configuration - Yealink W60P Administrator's Manual

Administrator's Guide for W60P/W53P/W41P DECT Phones
DD Phone UI Menu->Features->DND->AccountX->DND Status
account.X.dnd.on_code
Parameter
It configures the DND on code to activate the server-side DND feature.
The IP phone will send the DND on code to the server when you activate DND feature on the IP
phone.
Description
Example:
account.1.dnd.on_code = *73
Note: It works only if "features.dnd.allow" and "account.X.dnd.enable" are both set to 1.
Permitted Values String within 32 characters
Default Blank
Web UI Features->Forward& DND->DND->AccountX->On Code
account.X.dnd.off_code
Parameter
It configures the DND off code to deactivate the server-side DND feature.
The IP phone will send the DND off code to the server when you deactivate DND feature on the IP
phone.
Description
Example:
account.1.dnd.off_code = *74
Note: It works only if "features.dnd.allow" and "account.X.dnd.enable" are both set to 1.
Permitted Values String within 32 characters
Default Blank
Web UI Features->Forward& DND->DND->AccountX->Off Code
[1]
X is the account ID. X=1-8.

DND Synchronization for Server-side Configuration

DND synchronization feature provides the capability to synchronize the status of the DND features between the IP
phone and the server.
If the DND is activated in phone mode, the DND status changing locally will be synchronized to all registered accounts
on the server; but if the DND status of a specific account is changed on the server, the DND status locally will be
changed.
The following table lists the parameters you can use to configure DND synchronization for server-side.
Parameter features.feature_key_sync.enable
Description It enables or disables to synchronize the feature status between the IP phone and the server.
0-Disabled
Permitted Values
1-Enabled, the IP phone sends a SUBSCRIBE message with event "as-feature-event".
Default 0
150
[1]
[1]
<y0000000000xx>.cfg
<MAC>.cfg
<MAC>.cfg