Rtcp-Xr; Rtcp-Xr Configuration; Vq-Rtcpxr - Yealink W60P Administrator's Manual

Administrator's Guide for W60P/W53P/W41P DECT Phones
in SIP PUBLISH messages to a central voice quality report collector. Yealink IP phones support two mechanisms for
voice quality monitoring: RTCP-XR and VQ-RTCPXR.
Topics

RTCP-XR

VQ-RTCPXR

RTCP-XR
The RTCP-XR mechanism, compliant with
tained in RTCP-XR packets for monitoring the quality of calls. These metrics include network packet loss, delay metrics,
analog metrics and voice quality metrics.
Topic

RTCP-XR Configuration

RTCP-XR Configuration
The following table lists the parameters you can use to configure the RTCP-XR.
Parameter
Description
Permitted Values
Default
Web UI
Parameter
Description
Permitted Values
Default
Parameter
Description
Permitted Values
Default
[1]
If you change this parameter, the IP phone will reboot to make the change take effect.
VQ-RTCPXR
The VQ-RTCPXR mechanism, compliant with
PUBLISH messages to the central report collector.
A wide range of performance metrics are generated in the following three ways:
Based on current values, such as jitter, jitter buffer max and round trip delay.
l
Covers the time period from the beginning of the call until the report is sent, such as network packet loss.
l
180
RFC 3611-RTP Control Extended Reports (RTCP
[1]
voice.rtcp_xr.enable
It enables or disables the IP phone to send RTCP-XR packets.
0-Disabled
1-Enabled
0
Settings->Voice Monitoring->Voice RTCP-XR Report
[1]
voice.rtcp.enable
It enables or disables the IP phone to send RTCP packets.
0-Disabled
1-Enabled
1
[1]
voice.rtcp_cname
It configures the cname of the RTCP packets.
String
Blank
RFC 6035, sends the service quality metric reports contained in SIP
XR), provides the metrics con-
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg