Dhcp Option 60; Dhcp Option 60 Configuration; Vlan - Yealink W60P Administrator's Manual

Description It configures the DHCP Option 12 Hostname on the IP phone.
Permitted Values String within 99 characters
Default W60B
Web UI Features->General Information->DHCP Hostname
[1]
If you change this parameter, the IP phone will reboot to make the change take effect.

DHCP Option 60

DHCP option 60 is used to indicate the vendor type and configuration of a DHCP client. You can set the format for
option 60. Servers can use option 43 to return the vendor-specific information to the client.
Topic

DHCP Option 60 Configuration

DHCP Option 60 Configuration
The following table lists the parameters you can use to configure DHCP option 60.
Parameter static.network.dhcp.option60type
Description It configures the DHCP option 60 type.
0-ASCII
Permitted Values
1-Binary
Default 0
Parameter static.auto_provision.dhcp_option.option60_value
Description It configures the value (vendor class of the device) of DHCP option 60.
Permitted Values String within 99 characters
Default yealink
Web UI Settings->Auto Provision->IPv4 DHCP Option Value

VLAN

The purpose of VLAN configurations on the IP phone is to insert a tag with VLAN information to the packets generated
by the IP phone. When VLAN is properly configured for the ports (Internet port and PC port) on the IP phone, the IP
phone will tag all packets from these ports with the VLAN ID. The switch receives and forwards the tagged packets to
the corresponding VLAN according to the VLAN ID in the tag as described in IEEE Std 802.3.
In addition to manual configuration, the IP phone also supports automatic discovery of VLAN via LLDP, CDP or DHCP.
The assignment takes effect in this order: assignment via LLDP/CDP, manual configuration, then assignment via DHCP.
For more information on VLAN, refer to
Topics
LLDP Configuration
CDP Configuration
Manual VLAN Configuration
(RFC 3925)
VLAN Feature on Yealink IP
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Phones.
Phone Network
23