Cisco SPA 525G2 User Manual page 34

When paired with your mobile phone, the Cisco SPA 525G2 display screen assigns one of your line buttons
to the mobile phone. A mobile phone icon with a flashing lightning bolt icon is displayed next to the
mobile phone name, number, or other identifier (such as the phone model) for your phone.
Note: The name, number, or other identifier shown depends on what is configured on your mobile
phone. If you have not configured a name on your phone, the phone may display your phone
number or some other identifier (such as the phone model). The display name can vary depending
on your phone model and configuration.
The Bluetooth phone icon colours show the status of your mobile phone and/or the
Cisco SPA 525G2:
No icon – Bluetooth is disabled
Gray icon – Bluetooth is enabled, but the phones are not connected.
Blue icon – Bluetooth is enabled and the Cisco SPA 525G2 is connected to a headset.
Green icon – Bluetooth is enabled and the Cisco SPA 525G2 is connected to a mobile phone.
To verify the mobile phone configuration:
1. On the Cisco SPA 525G2, press the Setup Button.
2. Scroll to User Preferences and press Select.
3. Scroll to Bluetooth Configuration and press Select.
4. Scroll to Bluetooth Profiles and press the Right Arrow key.
The mobile phone appears in the list of Bluetooth devices.
Version 1.5 34 of 47