Viewing network information
1. Press the Setup button.
2. Scroll to 'Status' and press 'Select'.
3. Scroll to 'Network status' and press 'Select' - you'll then be able to see the following information:
o Network type
o Network status
o Addressing type
o IP address
o Subnet mask
o Default router
o Primary DNS
o Secondary DNS
o MAC (hardware) address
Viewing phone line and extension information
1. Press the Setup button
2. Scroll to 'Status' and press 'Select'
3. Scroll to 'Phone status' and press 'Select' - you'll then be able to see the following information:
o Phone status – up time and packets sent/received
o Extension status – this will tell you if an extension's been registered and when, plus lots
more
o Line status – active calls and call information
o Provisioning status – If a profile rule was used, and the status
o Call statistics history – this details information about individual calls
Viewing peripheral status
To see information about phone peripherals, like a USB memory stick or Cisco SPA attendant console:
1. Press the Setup button
2. Scroll to 'Status' and press 'Select'
3. Scroll to 'Peripheral status' and press 'Select' – you'll then be able to see the following information:
o USB status
o Attendant console (Attn Cons) status
Version 1.5
44 of 47