Using Your Ip Phone With Your Bluetooth-Enabled Mobile; Enabling Bluetooth - Cisco SPA 525G2 User Manual

Using your IP phone with your Bluetooth-enabled mobile

The Cisco SPA 525G2 supports Bluetooth so you can use your phone with a wireless Bluetooth-enabled
headset. You can also use your IP phone with a Bluetooth-enabled mobile.
You can do the following:
 Pair your Bluetooth-enabled mobile phone and Cisco SPA 525G2. Your mobile is assigned a line
button on your Cisco SPA 525G2. You can make and receive mobile calls using the Cisco SPA
525G2
 Switch audio for in-progress calls between your mobile phone and the Cisco SPA 525G2
 Import your mobile phone address book to your Cisco SPA 525G2 personal address book
 Use your Cisco SPA 525G2 as a "handsfree device" for your mobile phone
Note: Not all mobile phones support this function. See the list of Bluetooth-enabled mobile phones
supported with the Cisco SPA 525G2 that is posted at the Cisco support community at
http://www.cisco.com/go/smallbizsupport, and also consult the latest Cisco SPA 525G2 release
notes available at cisco.com.

Enabling Bluetooth

To enable Bluetooth:
1. Press the Setup button.
2. Scroll to User Preferences and press Select.
3. With Bluetooth selected, press the right arrow key until a blue check mark appears.
4. Press Set.
Version 1.5 31 of 47