User Manual
2.4.2
IDOS Function Procedures
The procedures for an IDOS module are the same as for the internal
pressure sensor.
Enable the IDOS module from the TASK menu:
IDOS function (Measure or Differential)
•
If necessary, change the Units for the function
•
If necessary, set a Utility for the function:
•
The Settings menu for the IDOS module contains the following
options.
Units.
•
Process (Tare, Alarm, Filter, Flow, Scaling).
•
Zero. The procedure is the same for an IDOS module or the
•
internal pressure sensor. Zero the gauge sensor before use.
Resolution. Select the number of digits to be displayed.
•
Page 53 of 79
I.
Max/Min/Avg
II.
Switch Test
III.
Leak Test
IV.
Relief Valve
[EN] English – K0571 Issue 1
Druck DPI611