User Manual
1.10.1 Pump
Figure 1-6
1.10.2 Volume Adjuster
Volume Adjuster
Page 16 of 79
Pump
Figure 1-7
When you have set the operation to
pressure or vacuum (See Section 1.10),
seal the system (See Section 1.9.2) and
use the pump to set the necessary
pressure or vacuum.
You
can
then
adjustments with the volume adjuster
(See Section 1.10.2).
This control increases or decreases the
pressure/vacuum.
Before you seal the system (See Section
1.9.2), turn this control to the necessary
position:
•
For equal adjustment, turn it to the
middle of its range.
•
For maximum adjustment, turn it
fully clockwise or
counterclockwise.
When you have set the necessary
pressure or vacuum with the pump
(See Section 1.10.1), use the volume
adjuster to make the fine adjustments.
[EN] English – K0571 Issue 1
Druck DPI611
make
the
last