User Manual
Page 37 of 79
Figure 2-11 Channel Settings Menu
III.
Setup a channel for measurement
DIRECTION selects
•
measure for the selected function.
FUNCTION selects the function required
•
(E.g.: Current or Voltage). For more options, scroll
down the menu by swiping the display from
bottom to top.
UNITS selects the type of unit required, (E.g:
•
Volts, Amps), please note that there may only be 1
type of unit available in particular Functions.
Source or
[EN] English – K0571 Issue 1
Druck DPI611