Viscount Cantorum Dou User Manual page 83

6.3 SELECTING THE ORCHESTRAL VOICES (ORCHESTRA function)
As described in chap. 2, in the set of voices of the Cantorum Duo are also present a series of orchestral
timbres.
To select an orchestra voice, access the STYLES menu and then select the ORCHESTRA field. The
display shows:
For each division, in the VOICE column you can select the orchestral voice while in the SUS. column
you can enable or disable the Sustain pedal function.
For easier detection, the thumb piston being programmed is switched on based on the position of the
cursor on the display.
To quit the function press [EXIT]. The changes made will be automatically saved in the current organ
style.
NB
Any general combination and Tutti can recall orchestra voices; this means that the stops can be
used to activate different voices, according to the current combination/Tutti. To save orchestra
voices to combinations or Tutti, the corresponding option must be activated through the
COMBINATIONS function (see par. 5.6).
EN - 27
User Manual