Viscount Cantorum Dou User Manual page 61

7
9 10
7. ORCHESTRA pistons: pistons for activation and deactivation of orchestral voices.
- [ORCH P]: orchestral voice of Pedal.
-
[ORCH I]: orchestral voice of Manual I.
- [ORCH II]: orchestral voice of Manual II.
It is possible to select the voice activated by each piston. For further information read par. 6.3.
8. [S] piston: to save a general combination or the Tutti, after setting up the voices, press and hold the
[S] piston; then press the piston corresponding to the combination you wish to save.
To save a Crescendo step, select it through the Crescendo pedal, press and hold [S], and then press the
general memories [HR] piston. To copy the content of one step to another, first select the step you
wish to copy, then press and hold the [S] piston, select the step in which you wish to paste the content,
and finally press the general memories [HR].
Organ Styles, tremulant Speed and Depth and orchestra voices can be saved to any combination or
Tutti. This allows a wider range of different combinations, adjusting the sound to play different songs.
To use these functions, first you have to set the saving options through the COMBINATIONS
function, described in par. 5.6.
N.B.
If the [S] piston LED light is off, this means that the SECURITY function for the combinations
(see par. 5.9) is active. In this case it is not possible to modify combinations, Tutti and the
Crescendo.
9. Style pistons: here are the style pistons for the selection of the organ style (see also chapt. 6).
-
[BAR]: baroque
-
[BRK]: barock
-
[ROM]: romantic
-
[SYM]: symphonic
After the selection, if the display shows the main video page (see chap. 3), a pop-up message appears
for a few seconds, showing the Style name.
10. Tremulant thumb pistons: here are the thumb pistons for the activation / deactivation of the
Tremulant for each section.
- [TREM I]: [TREM I]: Manual I Tremulant.
- [TREM II]: [TREM I]: Manual II Tremulant.
11
EN - 5
12
User Manual
8
13 14 13