Viscount Cantorum Dou User Manual page 70

User Manual
In all the equalizers, press [EXIT] to exit the video page and save the new settings.
N.B.
The equalizers also affect the signal from the [INPUT] port located on the rear panel.
5.3 CHANNELING SIGNALS ON THE AUDIO OUTPUTS
(EXTERNAL OUTPUTS function)
Cantorum Duo has one more interesting function: it allows the user to select the sound source
transmitted through the rear panel outputs. Thanks to this function, the external loudspeakers can be
placed so as to simulate the actual position of the windchest in a pipe organ or choose whether outputs
should transmit only the reverberated signal.
To access this function page, select the EXT. OUTPUTS field under the SETTINGS menu:
The two columns clearly represent the two audio outputs, [OUT 1] and [OUT 2].
To move the cursor, use the [FIELD
To select the sound source press [VALUE +]. A checkmark will appear on the selected field(s).
Use the [VALUE -] button to delete the checkmark and deselect the sound source.
To quit the page and save the current settings, press [EXIT].
N.B.
The reverberated signal (REVERB field) always contains all organ sections and the signal from
the [INPUT] port located on the rear panel.
5.4 MIDI SETTINGS (MIDI functions)
NOTE
For further information about the MIDI interface, see par. 10.5 and 10.6.
To access the MIDI interface settings of the organ, select the MIDI field under the SETTINGS menu.
This first video page will appear:
] and [FIELD ] buttons.
 
EN - 14