Viscount Cantorum Dou User Manual page 69

5.2 ADJUST EQUALIZERS (EQUALIZERS functions)
The Cantorum Duo is equipped with three graphic equalizers, one for the sound reproduced by the
internal speakers and the other two for the signal present on the two pairs of audio outputs [OUT 1] and
[OUT 2] on the rear panel. The sound generated by the instrument can be calibrated through the
equalizers, in order to adapt to the environment and to the player's needs and personal taste.
To access the calibration page, select the EQUALIZERS field under the SETTINGS menu. The
following video page will appear:
the page contains the following fields:
o INTERNAL: graphic equalizer for the internal amplifier (and therefore for the internal speakers).
o OUT 1: graphic equalizer for the [OUT 1] output pair, on the rear panel.
o OUT 2: graphic equalizer for the [OUT 2] output pair, on the rear panel.
This is the graphic equalizers calibration page:
In the lower part of the screen there are the seven central band frequencies. To move the cursor from one
band to the other, use the buttons [FIELD
Each band can be modified, using the buttons [VALUE +] and [VALUE -] from +9 dB (maximum signal
gain) to -9 dB (maximum signal dampening). The level of gain or attenuation is graphically represented
and can be compared to the grading scale on the left side of the screen.
The following graph shows how the graphic equalizers works.
Gain
+9 dB
+8 dB
+7 dB
+6 dB
+5 dB
+4 dB
+3 dB
+2 dB
+1 dB
0 dB
-1 dB
-2 dB
-3 dB
-4 dB
-5 dB
-6 dB
-7 dB
-8 dB
-9 dB
20 Hz 100 Hz
] e [FIELD

220 Hz 460 Hz
EN - 13
].

1 KHz 2,2 KHz 4,6 KHz
User Manual
F
10 KHz 20 KHz