Viscount Cantorum Dou User Manual page 63

The currently selected level is displayed on the main video page inside the "CRESCEN." box.
The Crescendo controls all the registers, and modifies the stops configuration. Each level of the
crescendo can be programmed. To save the Crescendo configuration, see point 9.
N.B.
- When switching on, the instrument automatically detects the polarity of the switch pedal
connected to the [SUSTAIN] connector. Do not hold down the pedal when turning the power
on, to avoid reversing the operation of the pedal.
-
The [CRESC.] pedal can control also the volume of Pedal and Manual I. For further
information about this function read par. 5.7.
17. [INPUT] connector: stereophonic line input for external audio signals. The external audio signal is
added to the sound produced by Cantorum Duo.
18. Connettore [USB]: USB drive connector (drive not included with the instrument), where the organ
settings and songs recorded with the internals sequencer can be saved.
19. [MIDI] connectors: connectors for connecting MIDI devices.
-
[IN]: input connector for receiving data from an external MIDI unit to the Cantorum Duo.
Connect to the MIDI output of the transmitting device (e. g. a sequencer).
-
[OUT]: this connector transmits the MIDI data generated by Cantorum Duo. Connect to the
MIDI input of the receiving device (e. g. an expander).
N.B.
- For further information about the MIDI interface, read par. 5.4, 10.5 and 10.6.
- For further information about the USB devices, read par. 7.1.
20. [PHONES] connector: jack socket to which a headphone set can be connected. With headphones
connected, the organ's internal amplification is cut off.
21. [MAINS AC-IN] socket: connector for the power cable supplied with the instrument.
22. [POWER] switch: switches the Cantorum Duo on and off.
EN - 7
User Manual