Deleting An Event - Intermatic InTouch CA5500R User Manual

Deleting an Event

During programming, use the
navigate to your selections on the screen. Use the
arrow to advance to the next screen.
<RIGHT>
NOTE: If you pause for more than 30 seconds during
the programming procedure, the In-Wall Master
Controller will time out and
exit programming mode.
Begin at the InTouch Home
Screen as shown.
1. Press
<ENTER>
displays the Main Menu.
2. Scroll with the
arrows to select
DOWN>
My Events, then press
. The screen
<ENTER>
displays options for working with events.
3. Select Delete Event,
then press
<ENTER>
screen displays a list of
the events programmed
in your system.
4. Select the event you
want to delete and press
. The screen
<ENTER>
requests confirmation
before it will delete the event.
5. Press the
<RIGHT/LEFT>
. The system deletes the event. The display
<ENTER>
returns to the Main Menu screen, and automatically
exits programming mode in about 30 seconds if
there's no activity.
Providing a brighter solution.™
<ARROW>
. The screen
Setup Setup
<UP/
My Events My Events
>Delete Event >Delete Event
. The
arrows to select Yes, then press
Troubleshooting
buttons to
11:25 11:25
TM TM
WIRELESS CONTROLS WIRELESS CONTROLS
My Scenes My Scenes
My Events My Events
Add Event Add Event
Configure Event Configure Event
Rename Event Rename Event
Delete Event Delete Event
My Events My Events
Event 1 Event 1
Event 2 Event 2
>Delete Event >Delete Event
Remove Event 1 Remove Event 1
Save & Close Save & Close
No No Yes Yes

a a
11:25a 11:25a
11:25a 11:25a
11:25a 11:25a
11:25a 11:25a