Deleting A Scene - Intermatic InTouch CA5500R User Manual

0
InTouch™ User Guide
Menu screen, and automatically exits programming
mode in about 30 seconds if there's no activity.

Deleting a Scene

During programming, use the
navigate to your selections on the screen. Use the
arrow to advance to the next item.
<RIGHT>
NOTE: If you pause for more than 30 seconds during
the programming procedure, the In-Wall Master
Controller will time out and
exit programming mode.
Begin at the InTouch Home
Screen as shown.
1. Press
<ENTER>
displays the Main Menu.
2. Scroll with the
arrows to select My
Scenes, then press
The screen displays a list of
options for working with scenes.
3. Scroll down to select
Delete Scene, then press
. The screen
<ENTER>
displays a list of the
scenes programmed in your system.
4. Select the scene you
want to delete and press
. The screen
<ENTER>
requests confirmation
before it will delete the scene.
5. Press the
<RIGHT/LEFT>
. The system deletes the scene. The display
<ENTER>
returns to the Main Menu screen, and automatically
exits programming mode in about 30 seconds if
there's no activity.
Copyright © 2006 Intermatic, Inc.
<ARROW>
. The screen
Setup Setup
<UP/DOWN>
.
<ENTER>
>Delete Scene >Delete Scene
>Delete Scene >Delete Scene
Remove Scene1 Remove Scene1
arrows to select Yes, then press
buttons to
11:25 11:25
TM TM
WIRELESS CONTROLS WIRELESS CONTROLS
My Scenes My Scenes
My Events My Events
My Scenes My Scenes
Turn on Scene Turn on Scene
Configure Scene Configure Scene
Add Scene Add Scene
Rename Scene Rename Scene
My Scenes My Scenes
Scene 1 Scene 1
Save & Close Save & Close
No No Yes Yes
a a
11:25a 11:25a
11:25a 11:25a
11:25a 11:25a
11:25a 11:25a