Section 1: Setting Up Your Network; Overview - Intermatic InTouch CA5500R User Manual


InTouch™ User Guide
Section 1:
Setting Up Your Network

Overview

After each of your InTouch Wireless Control devices has
been wired in place or plugged into an electrical outlet,
you need to link them together into "your" network.
This makes sure that no device has been left out. It also
ensures that, should your neighbors also have Z-Wave
systems, no outside controllers can operate your
network.
Usually, the electrician who wired your system will have
set up the network. If not, you can do it yourself. The
basic procedure is simple.
This section also provides instructions for removing a
device from your network—something you need to do if
you replace an old device with a new one.
Your InTouch network exists around the Hand-Held
(Model CA5500R) and its Base (Model CA5500B), which
is also the hub of the network.
Copyright © 2006 Intermatic, Inc.