Activating A Scene With A Scene Selection Button; Renaming A Scene - Intermatic InTouch CA5500R User Manual


InTouch™ User Guide
Activating a Scene with a Scene
Selection Button
After you've assigned scenes to scene selection buttons,
it's easy to activate the scenes.
1. Press the button assigned to the scene to select it.
You now have three options for adjusting the scene:
• Press the
OFF.
• Press and hold the
the level. Release the
you're satisfied with the levels.
• Press and hold the
the level. Release the
you're satisfied with the levels.
2. Press the
<SCENE SELECTION>
it or the
<HOME>
NOTE: More than one
be pressed to adjust several scenes at the same time.
If you want to deselect all the scenes selected before
making changes, press the
controller.

Renaming a Scene

When you create a scene, the system gives it a generic
name like "Scene 1." With this procedure, you can give
the scene a more descriptive name, like "Kids' Room" or
"Watching Movies."
During programming, use the
navigate to your selections on the screen. Use the
arrow to advance to the next item.
<RIGHT>
NOTE: If you pause for more than 30 seconds during
the programming procedure, the In-Wall Master
Controller will time out and
exit programming mode.
Begin at the InTouch Home
Screen as shown.
Copyright © 2006 Intermatic, Inc.
button to turn the scene ON or
<ENTER>
<RIGHT>
<RIGHT>
<LEFT>
<LEFT>
button to deselect a group of scenes.
<SCENE SELECTION>
<HOME>
<ARROW>
arrow button to raise
arrow button when
arrow button to lower
arrow button when
button again to deselect
button can
button on the
buttons to
11:25 11:25
TM TM
WIRELESS CONTROLS WIRELESS CONTROLS
a a