View Data Menu; Set Barcodes Menu; Code Options Menu; Scan Options Menu - KoamTac KDC20 Reference Manual

KDC User Manual
KDC Mode Menu
The KDC Mode Menu has two options – Normal Mode and Application Mode.
Normal
This is the default mode that provides basic barcode scanning. In normal mode, barcode data
may be manipulated directly through the KDC or through KTSync during the synchronization
process.
Application
This mode enables the user to run the user application created by the Application Generation
Tool, as described in

View Data Menu

This menu option enables the user to view and/or delete barcodes stored in the KDC. In the
case of the KDC20/30, you may delete the last scanned barcode by pressing the DELETE button
on the right side of the unit.

Set Barcodes Menu

This menu lists all the barcode symbologies supported by the KDC and enables the user to
select the barcode symbologies to be scanned. For maximum scan performance, you should
select only the symbologies that you will be scanning. Please refer to
Symbologies for a detailed listing of symbologies supported by the KDC.

Code Options Menu

The KDC supports various Code Options, including Transmission of Start and Stop Characters,
Symbology Conversion, Verification of Optional Check Character, and Transmission of Check
Digit. Please refer to
option.

Scan Options Menu

Power(KDC500 only)
Chapter 6 Application Generation.
Press the Delete button to delete the last
scanned barcode.
Figure 17 - Delete Function in KDC20/30
10. Appendix A – 10.2 Code Options
B
LUETOOTH
10. Appendix A – 10.1
for a detailed explanation of each
82