Kdc Device Driver And Firmware; Upgrading Kdc Firmware - KoamTac KDC20 Reference Manual

KDC User Manual
3.3

KDC Device Driver and Firmware

Upgrading KDC Firmware

Requires: Windows PC, USB cable, KDC driver, KDC firmware application.
1. Download KDC driver at:
•
•
Note: Once it is installed before, you can skip this step.
2. Download KDC Firmware at:
•
•
NOTE: Or download the KDC firmware from the link that Koamtac provides.
3. Confirm the KDC Driver installed properly.
•
•
•
4. In the upgrade application, click 'Step 1: Select Serial Port'
•
•
•
5. Click 'Step 2: Check KDC'
Extract the folder, run Setup.exe only.
Follow the instructions on the installation wizard.
Choose your KDC model & its KDC firmware.
Extract the folder, open the KDC firmware upgrade application.
Plug in KDC to PC via USB.
Navigate to Device Manager [Start > Control Panel > System and Security >
> Device Manager].
System
Click on Ports (COM & LPT). The KDC should be listed as Koamtac Data
Collector.
Make sure all
programs are closed & KDC is not connected to any device via Bluetooth.
This should automatically detect the COM port the KDC is using.
If a blank dropdown appears, plug the KDC into a different USB port.
https://www.koamtac.com/downloads/drivers/
https://koamtac.com/downloads/firmware/
B
LUETOOTH
56